* Actual Retail Price TOO LOW to Publish! Call Home Controls for your DISCOUNT! 1-800-266-8765

HAI POWER HUB

CONNECTIONS FOR ANY 12VDC DEVICES, UP TO 5 AMPS TOTAL

The HAI Power Hub is a general purpose, digital, high efficiency 12VDC power supply engineered to meet the forthcoming ENERGY STAR requirements for power supplies and battery backups. It is designed to provide power to several HAI connected devices, including the HAI Access Control Card Readers with electric or magnetic locks, Omni Consoles, OmniTouch 5.7 Touchscreens, and many other devices.

The HAI Power Hub has convenient connections and power terminals for a neat installation. It is designed to eliminate unsightly transformers, power strips, external power supplies, battery backup units, and complex wiring normally associated with access control installations. Two of the Power Hubs may be connected together to connect up to 16 readers to an OmniPro II or Lumina Pro system.

The HAI Power Hub is available in an HAI OmniLT Series Enclosure or on the Universal Mounting Plate for installation in Structured Wiring enclosures. It is supplied with a sealed Power Pack, which provides power to the HAI Power Hub.

A LEADING MANUFACTURER OF HOME CONTROL PRODUCTS

HAI products will keep you safe, manage your energy consumption and comfort, and provide home entertainment, all in a coordinated and easy to use manner. HAI products are Automation Simplified®.

Home Automation systems are available for every income level and lifestyle. Just choose the automation, energy management, and convenience features you desire that will fit within your budget.

HAI systems may be installed in new or existing homes and may be accessed and controlled over the telephone or over the Internet.

HAI Power Hub Installation Manual (.pdf)
HAI Access Control Overview Tech Sheet (.pdf)

Features:

• Connections for any 12VDC devices, up to 5 Amps total
• Connections for the following HAI equipment:
  - 8 Model 75A00-1 Access Control Card Readers (with electric and magnetic locks), OR
  - 8 Omni Consoles and/or OmniTouch 5.7 Touchscreens, OR
  - 4 Model 75A00-1 Access Control Card Readers (with electric and magnetic locks), AND 4 Omni Consoles and/or OmniTouch 5.7 Touchscreens
• Power supply with battery back up for Access Control Card Readers (with electric and magnetic locks), Omni Consoles, and OmniTouch 5.7 Touchscreens
• Connections for all Omni and Lumina controllers
• Supervisory output can be connected to zone on HAI controller to indicate low battery
• Connectors for two sealed batteries, 12 V at 4 to 8 amp-hours each (not supplied)
• Supplied with Universal Switching Power Pack

Specifications:

• Operating Ranges:
  - 32 - 120 degrees F (0 - 49 degrees C)
  - 10 - 85 % relative humidity, non-condensing
• Power Pack:
  - Output 19VDC, 4.74 Amps, Max 90W
  - Input 100-240VAC, 1.5A Amps, 50/60Hz
• Output Power:
  - Nominal Voltage 12VDC
  - Maximum Current 5A
• Batteries: Sealed, Rechargeable, 12 Volts, 4 - 8 Amp-Hours, each
• Low Voltage Cut Out: 9.5VDC
• Main Fuse: 4A Polyfuse*
• Battery Fuses: 6A Polyfuse*

*Polyfuses are permanent fuses that do not need replacement.