|
|
|
HAI Omni Series 1 Branch ALC Interface
HA25A001
Actual Retail Price
TOO LOW to Publish *
|
Complete and expand your HAI system with these accessories. 16 zone (1 branch) ALC Hardwire Lighting Control Interface for Omni Series Controllers...
Price: $126.00
|
|
 Product Description
|
* Actual Retail Price TOO LOW to Publish!
Call Home Controls for your DISCOUNT!
1-800-266-8765 |
HAI OMNI 1 BRANCH ALC MODULE
OMNI CONTROL SYSTEMS BY HAI
Complete and expand your HAI system with these accessories. The Model HA25A001 and - 2 ALC Interfaces can be used with an OmniLT, Omni II, or OmniPro II controller to control lights and appliances connected to ALC Switch Modules.
Up to 16 unique ALC Switch Modules (one branch) can be controlled with OmniLT. Up to 62 unique ALC Switch Modules (two branches) can be controlled with Omni II. Up to 248 unique ALC Switch Modules (four branches on 2 ALC Interface Modules) can be controlled with OmniPro II.
ADVANCED LIGHTING CONTROL (ALC)
Advanced Lighting Control (ALC) is intended for installation in homes, which have been pre-wired for installation of ALC system products. Omni family and Lumina family home control systems control lights and appliances by sending commands over the ALC signal wiring to ALC Switch Modules. ALC Switch Modules communicate with the HAI home control system over low voltage signal wire. They are two-way devices, so the controller always knows the actual status of the switch. Additionally, any ALC switch may be used to set scenes by triggering macros in the HAI home control system.
An ALC branch cable (twisted-pair 20 to 24 gauge) must be present at each location. Additionally, an uninterrupted source of 120 VAC must be present at each Relay, Dimmer, Program, and 4 Button Scene switch location and a 3 conductor (20 to 24 gauge) cable for each ALC Auxiliary Switch for dedicated multi-way switching applications.
|
Specifications
|
|
HA25A001 ALC Interface Installation Manual (.pdf)
|
|
|
|
|
|
|
|
Why Automate
