* Actual Retail Price TOO LOW to Publish!
Call Home Controls for your DISCOUNT!
1-800-266-8765 |
HAI LIGHTING PROMO BUNDLE CAN BE EXPANDED UPON AS YOUR NEEDS GROW Lighting makes up a huge portion of energy expenses. This bundle provides complete control over various lighting throughout a home. Apply these control devices whether the home has an HAI home automation controller or not (UPStart software, PIM to PC Cable required). Makes for a great first taste of home automation and can be expanded upon as homeowner needs grow. A Scene Switch can be set to operate multiple lighting settings with the push of a single button. 110VAC only. Included with package - 35A00-1: 600W UPB Dimmer Switches (24)
- 37A00-1: Auxiliary Switches (6)
- 59A00-1: UPB Lamp Modules (4)
- 40A00-1: 15A Relay Switches (2)
- 38A00-1: Scene Switches, 6-Button (2)
- 38A15-WH: Table Top Scene Switch Cradles, White (2)
- 39A00-2: UPB Split Phase Repeater (1)
- 38A14-1: Scene Switch Remotes (2)
- 36A00-1: UPB Powerline Interface Module with Cable (1)
35A00-1: The 600 Watt UPB Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts. It is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode through the Configuration Software in order to control loads, such as fluorescent lights, that do not belong on a dimming switch. The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products. 37A00-1: The Auxiliary Switch is used in conjunction with HLC switches for multi-way lighting circuits. It can be used with any HLC Switch to make "three-way" (two switches control one light) and multi-way (more than two switches control one light) using conventional "three-way" wiring techniques. 59A00-1: The HAI UPB Lamp Module is a plug-in dimmer that incorporates the UPB two-way powerline communication technology, which gives it the ability to be remotely controlled by UPB compatible controllers. The Lamp Module has one UPB controllable outlet that can sense the lamp's local on/off switch to turn the lamp on even after it was turned off using UPB control. The HAI UPB Lamp Module is also capable of transmitting UPB messages (including current light level) when the local lamp switch is used to turn the lamp on. 40A00-1: The HAI UPB 15Amp Relay Switch controls non-dimming loads and is ideal for heavier loads (up to 15 amps) or for motors, such as ceiling fans that may hum when used with Dimming or Non-Dimming switches. It works as a standalone switch or may be used with other HAI Products. 38A00-1: The Scene Switch is also known as a Room Controller. It controls all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes to provide limitless options for both security and aesthetic lighting in your home. The HLC Scene Switch comes with infrared capability. 38A15-WH: The Table Top Scene Switch Cradle is used to table mount the Scene Switch (HA38A001), House Status Switch (HA38A002), or Lumina Mode Switch (HA38A003). The Table Top Scene Switch Cradle can be conveniently located throughout the home, including on a bedside nightstand, on the desk in a home office, or next to your favorite chair. It plugs directly into electrical outlet and has a cord length of 6 feet. 39A00-2: The HAI UPB Split-Phase Repeater (SPR) is a small electronic device that is designed to enhance the communication reliability between devices using the Universal Powerline Bus (UPB) method of communication (such as HLC devices). It is designed to be used in a typical residential 120/240VAC split-phase electrical environment. The main purpose of the SPR is to increase powerline communication reliability by taking UPB messages transmitted on one phase (leg) of the electrical system and strongly repeating them on to the other phase (leg). 38A14-1: The HAI Scene Switch Remote Control is used for controlling rooms of HLC lighting by sending infrared (IR) signals to HA38A001 6-Button Scene Switches with IR Receivers. To activate lighting, point the Scene Switch Remote Control at an HA38A001 Scene Switch and press the desired buttons. The room can be turned on, turned off, dimmed, brightened, or set to a scene (A-D). 36A00-1: The Powerline Interface Module (PIM) UPB will connect your lighting system to a UPB compatible home control system or to a computer, which can then control your UPB lights. It comes with a cable for connecting the PIM to a serial port on an HAI Lumina, Lumina Pro, Omni LT, Omni II, Omni IIe, or OmniPro II home control system. SMARTER PRODUCT PACKAGES FOR CONVENIENCE AND SAVINGS HAI has pre-packaged bundles to get you started. Promo Bundles are available for each of HAI's core home automation solutions and all of these packages can communicate with any language controller. |
