* Actual Retail Price TOO LOW to Publish!
Call Home Controls for your DISCOUNT!
1-800-266-8765 |
HAI HOME THEATER LIGHTING PROMO BUNDLE PERFECT SOLUTION FOR A LIMITED AUTOMATED LIGHTING APPLICATION Some applications may call for only one room to be automated for lighting. This bundle provides just the solution for a limited automated lighting application. With two Dimmer Switches and two Lamp Modules, a variety of lighting can be controlled and programmed. Control multiple lights via the Scene Switch which can be set to alter several light sources with the push of a single button. 110VAC only. Note: An HAI Controller is required for operation. Included With Package - 35A00-1: 600W UPB Dimmer Switches (2)
- 59A00-1: UPB Lamp Modules (2)
- 39A00-2: UPB Split Phase Repeater (1)
- 38A00-1: Scene Switch, 6-Button (1)
- 38A15-WH: Table Top Scene Switch Cradles, White (1)
- 38A14-1: Scene Switch Remote (1)
35A00-1: The 600 Watt UPB Dimmer Switch is used for controlling and dimming lighting loads up to 600 Watts. It is capable of storing up to 16 preset light levels to create powerful lighting scenes. It is capable of being set to a non-dimming mode through the Configuration Software in order to control loads, such as fluorescent lights, that do not belong on a dimming switch. The 600 Watt UPB Dimmer Switch works as a standalone switch or may be used with other HAI Products. 59A00-1: The HAI UPB Lamp Module is a plug-in dimmer that incorporates the UPB two-way powerline communication technology, which gives it the ability to be remotely controlled by UPB compatible controllers. The Lamp Module has one UPB controllable outlet that can sense the lamp's local on/off switch to turn the lamp on even after it was turned off using UPB control. The HAI UPB Lamp Module is also capable of transmitting UPB messages (including current light level) when the local lamp switch is used to turn the lamp on. 39A00-2: The HAI UPB Split-Phase Repeater (SPR) is a small electronic device that is designed to enhance the communication reliability between devices using the Universal Powerline Bus (UPB) method of communication (such as HLC devices). It is designed to be used in a typical residential 120/240VAC split-phase electrical environment. The main purpose of the SPR is to increase powerline communication reliability by taking UPB messages transmitted on one phase (leg) of the electrical system and strongly repeating them on to the other phase (leg). 38A00-1: The Scene Switch is also known as a Room Controller. It controls all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes to provide limitless options for both security and aesthetic lighting in your home. The HLC Scene Switch comes with infrared capability. 38A15-WH: The Table Top Scene Switch Cradle is used to table mount the Scene Switch (HA38A001), House Status Switch (HA38A002), or Lumina Mode Switch (HA38A003). The Table Top Scene Switch Cradle can be conveniently located throughout the home, including on a bedside nightstand, on the desk in a home office, or next to your favorite chair. It plugs directly into electrical outlet and has a cord length of 6 feet. 38A14-1: The HAI Scene Switch Remote Control is used for controlling rooms of HLC lighting by sending infrared (IR) signals to HA38A001 6-Button Scene Switches with IR Receivers. To activate lighting, point the Scene Switch Remote Control at an HA38A001 Scene Switch and press the desired buttons. The room can be turned on, turned off, dimmed, brightened, or set to a scene (A-D). SMARTER PRODUCT PACKAGES FOR CONVENIENCE AND SAVINGS HAI has pre-packaged bundles to get you started. Promo Bundles are available for each of HAI's core home automation solutions and all of these packages can communicate with any language controller. |
