Price: $104.95

GE SECURITY SHATTERPRO™ PLUS MOTION-SENSITIVE ACOUSTIC GLASSBREAK SENSOR

ELIMINATES OCCUPANT GENERATED GLASSBREAK SENSOR FALSE ALARMS

The ShatterPro™ Plus is an acoustic glassbreak sensor combined with a passive infrared motion detector (PIR) for the purpose of eliminating occupant generated false alarms. It will extend acoustic glassbreak technology to occupied areas, allowing these sensors to be armed while people or pets are present. Simply put, when a person enters the field of view of the motion detector the glassbreak sensor is shunted during the period of occupancy. This eliminates false alarms generated from normal noise levels during occupied hours at work or at home. The ShatterPro™ Plus can be wired into a 24-hour perimeter loop, free from concerns about false alarms generated by a noisy environment.

The ShatterPro™ Plus utilizes all the features of the ShatterPro II; excellent detection, false alarm immunity in quiet environments, new test feature and the hand clap end user feature. The PIR sensor utilizes Sentrol's SureShot™ signal analysis and detection patterns. ShatterPro™ Plus can also function as a combined PIR/glassbreak with individual alarm outputs to the panel for separate zoning. This allows for a separate PIR alarm and separate glassbreak alarm.

GE SECURITY INTRUSION AND PROPERTY PROTECTION

GE provides security and life safety solutions for applications from retail stores to manufacturing facilities to homes. Combine fire protection, intrusion, and central monitoring software like MASterMind to come up with a complete solution for your security needs.

ShatterPro Plus Glassbreak Sensor Spec Sheet (.pdf)
ShatterPro Plus Glassbreak Sensor Manual (.pdf)

Features

• 24-hour acoustic glassbreak application
• Motion-sensitive sensor "knows" the area is occupied and eliminates occupant generated false alarms
• High-quality ShatterPro II analysis combined with Sentrol motion signal analysis
• Two-relay output for arming either perimeter or interior loop or both
• Can function as two sensors in one package (PIR/Glassbreak)

Specifications

• Electrical
  • Operational voltage: 9 to 16 V DC
  • Current draw: 15 mA typical; 30 mA max.
  • Alarm outputs: Normally closed, open 4 seconds on alarm
  • On resistance: 5 to 15 Ohms
  • Off resistance: 20 MOhms
  • Maximum loop rating (relay or tamper loop): 16 V DC, 50 mA
  • Fails safe and opens on power loss
• Environmental
  • Lightning suppression: 400 watts for 1 msec pulse
  • Operating temperature: 0°F to 120°F (-18°C to +50°C)
  • RFI immunity: 20 V/meter from 1 to 1000MHz
  • Humidity: 10% to 90% noncondensing
• LED Indicator
  • Glassbreak alarm: 4 sec. solid red
  • Glassbreak test mode: 1 Hz blinking red/1 minute
  • Glassbreak latched: solid red
  • Hand Clap Test: 2 red blinks
  • PIR alarm: 4 sec. solid green
  • PIR shunting Glassbreak: 1 Hz blinking green
• Acoustic Glassbreak Features
  • Housing material: Flame retardant ABS plastic
  • Microphone: Omni directional 360° elect ret
  • Sensitivity setting: Factory set
  • Range: 15’ (4.6 m) to farthest point of glass
  • Glass types detected
    - Plate glass: Up to 1⁄4" (6.4 mm)
    - Tempered glass: Up to 1⁄4" (6.4 mm)
    - Wired glass: Up to 1⁄4" (6.4 mm)
    - Laminated glass: Up to 1⁄4" (6.4 mm)
  • Mounting location: Ceiling or any wall except opposite wall
  • Minimum distance from glass: 3.3’ (1 m)
  • Minimum glass size: 1’ x 2’
  • Dimensions:
    - 3.70" (9.40 cm) H
    - 2.20" (5.59 cm) W
    - 1.20" (3.05 cm) D
  • Color: White/white
• PIR Features
  • Pulse count: Bi-directional, 1 zone (2 pulses) with Motion Verification
  • Range:
    - 1. Wide Angle (90°): 30’ x 30’ (9.14 m x 9.14 m)
    - 2. 360° Ceiling: 15’ x 20’ (4.57 m x 6.10 m) at 8’ (2.44 m) high, 16’ x 30’ (4.88 m x 9.14 m) at 12’ (3.65 m) high, Ceiling mounting height up to 12’ (3.65 m)
    - 3. Single Spot: 40’ (12.19 m) range
    - 4. Vertical Barrier: 40’ (12.19 m) range
    - 5. Pet Alley (90°): 30’ (9.14 m) range