ELK PRODUCTS WATER SHUTOFF ELECTRIC VALVE

FULLY CLOSED IN LESS THAN 4 SECONDS!

STOP! water damage caused by leaking or broken pipes and hoses from washing machines, ice makers, toilets, water heaters, etc.

The ELKWSV is a Professional Grade, electrically operated water shutoff valve for both residential and commercial use. Used in conjunction with an automation controller, leak detection devices, or a simple manual pushbutton, the WSV can easily and conveniently shut off the main water supply to the building. Unlike competitors units, the ELKWSV is a stainless steel, 1" full bore, ball valve with commercial grade seats and seals. It is a "non-restricting" valve which meets the approvals of state and municipal water authorities. The motorized actuator has a permanently lubricated gear drive with sufficient torque to open or close the valve under high pressure or after long periods of inactivity. The ELKWSV valve can be operated via a simple 12 Volt DC input from a security or automation controller such as the ELKM1 Gold or M1EZ8. It can also be attached directly to a 12Vdc power source through a SPDT Emergency Pushbutton or "Easy" button for manual control. Operating time from fully open to fully closed is less than 4 seconds.

PREMIUM PRODUCTS FOR SECURITY AND AUTOMATION

ELK Products, Inc. designs and manufactures quality electronic equipment for the professional security alarm and home automation installer. Our products include siren drivers, speakers, relays, timers, programmable controls, surge suppressors, telephone equipment, amplifiers, recordable units, batteries and more.

ELK Products Water Shutoff Valve Installation Manual (.pdf)

• Rapid Action - Opening or Closing
  
• Provides Remote Shut off of Main Water Supply
  
• Integrates to Security or Automation Controller (e.g. Elk-M1 Gold or M1EZ8)
  
• Can be Integrated with a Simple "Easy" Button
  
• Can be Integrated with a Wireless Receiver and Wireless Pushbutton
  
• Simple 12 VDC, Four (4) Conductor Hookup
  
• Valve Direction/Water Flow Indication

• Operates from 12 Volts DC
  
• Min Rec. Power Supply: 12VDC, 1 Amp
  
• Current Draw: ~500mA nominal, 1 Amp peak
  
• Actuating Speed: < 4 seconds
  
• Torque: 1.25 in. lbs.
  
• Connections: 18 gauge, 4 conductor cord

• Full Port, 2-way Ball Valve
  
• Stainless Steel Grade 316
  
• 1" NPT threaded pipe connections

• 9" H x 5.75" W x 4" D