CABLES TO GO RAPIDRUN PC/VIDEO FLYING LEAD, HD15, STEREO AUDIO, RCA SIMULTANEOUSLY CONNECT PC VIDEO, 3.5mm STEREO AUDIO, AND COMPOSITE A/V The Cables To Go RapidRun HD15 + 3.5mm Stereo Audio + 3 RCA (YRW) Flying Lead is the perfect solution for educational and institutional installations. This particular Flying Lead cuts installation time and cost by allowing you to send PC Video, 3.5mm Stereo Audio, and Composite Audio/Video (3 RCA) over one cable. It is commonly used on the display (projector) end of classroom setups with the corresponding Wall Plate used at the teacher's station. Available In 1.5, 3, 6, and 10 Foot Lengths. Please Note: This flying lead must be used with a plenum-rated PC (yellow) Runner, not a CL2-rated Runner. Each complete RapidRun solution requires a break-away flying lead or wall plate to terminate each end of the runner cable. For each runner you will need (2) break-away flying leads, (2) wall plates, OR (1) break-away flying lead and (1) wall plate. RAPIDRUN™ SOLUTIONS RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations. RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field. Putting an end to restrictive cabling and time-consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of Runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI™ and DVI. Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner and with a twist and turn, your termination is complete. RapidRun is the fast, complete A/V cabling system. |
