RAPIDRUN PC ADAPTER WITH TWO 3.5 mm AUDIO BREAKOUT TWO 3.5mm STEREO AUDIO FROM YELLOW RAPIDRUN RUNNERS The RapidRun Yellow Adapter allows you to run two separate 3.5mm audio cables outside the yellow RapidRun runner. Connect the adapter to the lead of the RapidRun wall plate. Connect the yellow runner to the yellow adapter lead and to your choice of a wall plate or flying lead. Then attach the separate 3.5mm cables to the 3.5mm female adapter lead and to your audio devices and that’s it. Ideal for applications where video and audio are being delivered to separate equipment in different locations. Requires the use of two separate 3.5mm audio cables. RAPIDRUN™ SOLUTIONS RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations. RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field. Putting an end to restrictive cabling and time-consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of Runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI™ and DVI. Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner and with a twist and turn, your termination is complete. RapidRun is the fast, complete A/V cabling system. |
