BLOW OUT SALE – SAVE ON 1.5 FT. CABLE! | Priced Below Our Cost – Very Limited Quantities – Don’t Miss This Deal! | RAPIDRUN DIGITAL DVI-D PASSIVE FLYING LEAD COLOR CODE: RED FOR USE WITH RAPIDRUN DIGITAL RUNNERS The Cables To Go RapidRun DVI-D Passive Flying Lead supports DVI-D high resolution video up to 1080p (4.95 Gbps). Use this Flying Lead on either end of the Digital Runner to create a DVI-D system up to 35 feet, or on the display end of the Digital Runner in an active system up to 100 feet. The DVI-D passive flying lead is the right complement for the Digital Runner when a wall plate is not required. It is most commonly used when connecting a PC to a monitor or projector. Whether hanging a flat panel TV in a home or installing a commercial digital signage system, a crisp, clean signal up to 1080p resolution will be delivered every time. When using the Digital Runner at lengths up to 35 feet, a passive flying lead or wall plate will be required on each end. When using the Digital Runner at lengths up to 100 feet, a passive break-away is required only at the source end. Terminate with flying leads, or with wall plates to meet the specific requirements of your installation. These replace Cables To Go parts 40870, 40871, 40872, and the 40873. RAPIDRUN SOLUTIONS RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations. RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field. Putting an end to restrictive cabling and time consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI and DVI. Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner, and with a simple twist and turn, your termination is complete. RapidRun is the fast, complete A/V cabling system. |
