RAPIDRUN® DIGITAL DVI-D™ ACTIVE WALL PLATE SUPPORTS DVI-D HIGH RESOLUTION VIDEO UP TO 1080p (4.95 Gbps) 1080p resolution! Use on the display end of the digital runner to create a DVI system 50 feet or longer. The DVI-D active wall plate is the right complement for the Digital Runner when a clean, finished look is required. It is most commonly used in homes when connecting a PC to a monitor or projector. Whether hanging a flat panel TV in a home or installing a commercial digital signage system, a crisp, clean signal up to 1080p resolution will be delivered every time. When using the Digital Runner at lengths from 50 to 100 feet, an active wall plate or break-away is required at the display end. Terminate with flying leads (with lengths up to 10 feet), or with wall plates (available in three colors) to meet the specific requirements of your installation. Please Note: Each complete RapidRun solution requires a passive break-away flying lead or passive wall plate on both ends of Runner cables up to 35 feet. For Runners 35 feet and longer, each solution requires a passive break-away flying lead or passive wall plate on the source end, and an active break-away flying lead or active wall plate on the display end to terminate the runner cable. Available In Black, Ivory, and White RAPIDRUN™ SOLUTIONS RapidRun is the most complete audio/video cabling system – built to save installation time, accommodate changes, and reduce the likelihood of return service calls due to faulty field terminations. RapidRun was designed to evolve with your constantly expanding needs. This revolutionary system pioneered a modular Wall Plate, providing the reliability of a factory termination in the field. Putting an end to restrictive cabling and time-consuming installation, the genius behind RapidRun starts with the Runner – the main base cable that runs through walls, rooms and fixtures. To expand its flexibility, multiple signal types can be supported over your choice of Runner cable – such as VGA, Composite Video, S-Video, Component Video, or HDMI and DVI. Just select the Wall Plate or Flying Lead that is right for your A/V application, connect the Break-Away to the Runner and with a twist and turn, your termination is complete. RapidRun is the fast, complete A/V cabling system. |
