ANDEV, INC. SENSORPLUG MOTION ACTIVATED ELECTRICAL OUTLET
NO WIRING - NO BATTERIES - NO TOOLS - NO EXPENSE
SensorPlug is a motion activated plug-in electrical outlet, patented and UL listed. Its plug-in design eliminates wiring and associated expenses common to other motion activated products. The passive infrared (PIR) motion sensor used in this product offers the convenience of controlling many of the household electrical products - not just lighting - by motion. It is the only motion activated product that can be used to control lighting as well non-lighting electrical products.
In the "L" position, whatever is plugged into the SensorPlug’s outlet will turn ON when motion is detected and the ambient light level is low. In the "O" position, the SensorPlug’s outlet is energized whenever motion is detected regardless of the ambient light level. This feature allows SensorPlug to be used for controlling non-lighting fixtures such as a fan, a radio etc.
The PIR activates SensorPlug’s outlet when motion is detected and keeps devices ON for a pre-selected time based on the timer position. The timer resets to zero every time motion is detected within the time interval set by the timer setting allowing you to keep electrical devices ON for as long as room is occupied and motion is detected. Power to the SensorPlug’s outlet automatically turns OFF after the pre-selected time set by the timer if no motion is detected.
HANDS FREE LIGHTING AND MORE!
SensorPlug is Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. It was featured on HGTV and in USA Today. Its’ plug-in design eliminates electrical wiring which can be expensive if done by a licensed electrician and dangerous if done by an inexperienced person.
Variable timer: Approximately 2 to 6 minutes
Voltage rating: 110 - 120 volt 60 Hz AC
Maximum Load: 500 Watts
Minimum Load: 5 to 7 Watts
Optimum Temperature range: 75° to 85°F
Sensing angle range: 160°
Max. Sensing range: Up to 25’
Red LED indicator light flashes when motion is detected
Timer resets to zero every time motion is detected
Low standby power consumption (approximately 3 watts)
It can be secured to the wall plate (securing screw included)
Circuit protected by easy to replace fuse (spare fuse included)
