|
|
|
|
Aeon Labs Smart Energy Switch
AEDSC06106ZWUS
Price: $59.95
|
|
|
|
|
 Product Description
|
AEON SMART ENERGY SWITCH
Z-WAVE APPLIANCE MODULE WITH ENERGY MONITORING CAPABILITITES
The Aeon Labs Smart Energy Switch is a low-cost Z-Wave appliance switch which can report immediate wattage energy usage or kWh energy usage over a period of time. It can also be controlled by other Z-Wave devices to turn on/off to save electricity when appropriate.
It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node.
By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary "listening" Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
The Aeon Labs Smart Energy Switch can report wattage energy usage or kWh energy usage to a Z-Wave gateway or controller when requested. If this function is supported by the gateway/controller, the energy consumption will be displayed in the user interface of the gateway/controller.
With an unobtrusive small form factor, the Aeon Labs Smart Energy Switch will not block other nearby AC outlets.
|
|
Aeon Labs Smart Energy Switch Instruction Manual (.pdf)
Product Highlights: - Low-cost Z-Wave energy monitor and on/off appliance switch
- Small form factor that is not intrusive and does not block other outlets
- Firmware updatable in field by end-consumer
- Latest Z-Wave protocol and commands
- Optimized antenna range: 100+ feet tested
- Designed and built with gateway partners and end-consumers in mind
- Certified/Available for USA, EU and Australian markets (UL, FCC, CE, C-TICK, ROHS)
Technical Specifications: - USA: 120V 60Hz input, 1875W or 15A maximum output
- EU: 250V 50Hz input, 4000W or 16A maximum output
- AU: 240V 50Hz input, 2400W or 10A maximum output
|
|
Product Accessories
|
|
|
|
|
|
|
|
|
|
|
